Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
Welcome Guest

Clear All Filters  

Standard Abrasives™ A/O Buff and Blend GP Roll 830016, 6 in x 30 ft A FIN, 2 ea/Case

Standard Abrasives™

$114.24 / Roll

SKU 7010368520
Legacy SKU 66000035015
UPC 00051115359019
Product Number 830016

The Standard Abrasives Aluminum Oxide Buff and Blend Roll combines nylon strands and aluminum oxide with a resin bond, resulting in an open web that is responsive and durable enough for deburring, cleaning, blending and finishing. Available in a versatile range of grades and sizes, you can choose the right roll for your application.

  • Open web is load resistant, reducing the likelihood of abrasive clogging with debris, thereby prolonging service life
  • Aluminum Oxide mineral is friable and breaks down to reveal sharp cutting edges for a consistent cut
  • Abrasive may be run wet to help wash away swarf and keep abrasive running cool, minimizing potential for heat-induced smearing and blemishes
  • Roll form may be shaped according to application requirements
  • Versatile selection of Buff and Blend materials are available to ensure the right roll for each application
  Add to cart
On it's way to you January 23   

Qty

Minimum Order 2 Rolls
Order Increment 2 Rolls
  Multi-Functional
  Global Shipping
  Fantastic Price
  Best Price Match Guarantee
Product Dimensions
 Imperial Metric
Weight 3.58251 lbs
Width 13-1/2 in
Length 13-1/2 in
Height 6 in
Shipping Dimensions
Weight 9.19989 lb
Length 14.6 in
Width 14.5 in
Height 13.3 in

PRODUCT FAQ

  1. What is the benefit of using 3M's Standard Abrasives™ A/O Buff and Blend GP Roll 830016?

    The benefit of using this roll is that it offers a consistent finish without sacrificing productivity.

  2. What are some common industries that use this product?

    This abrasive roll is commonly used in the metalworking, woodworking, plastics, and composite manufacturing industries.

  3. Is this product easy to use?

    Yes! Its flexible design conforms well to contour surfaces for efficient finishing.

  4. How long can I expect this abrasive roll to last?

    This depends on how often you use it and what type of material you're working with. However, these rolls are built with durability in mind so they should remove stock effectively over time.

  5. Do I need any special equipment to use this product?

    You don't necessarily need special equipment to make good use out of our A/O Buff and Blend Roll. If you have access to an electric or pneumatic dependent speed buffer/ polisher machine then that would help simplify things but not necessary for all applications

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
Recommended Applications

The Standard Abrasives™ Aluminum Oxide Buff and Blend Roll is a versatile abrasive that can be used for a variety of industrial jobs, including deburring, cleaning, blending, and finishing. This roll can be used to:

  • Blend minor surface imperfections, handling marks, and secondary burrs on coated abrasives
  • Remove minor surface oxidation and rust when prepping surfaces for coating
  • Remove part lines from small castings, small burrs from threaded parts, and flash from plastic molded parts
  • Produce fine grain finishes on stainless steel after weld removal and use for cosmetic finishing on aluminum castings

The key to using the Standard Abrasives™ Aluminum Oxide Buff and Blend Roll effectively is to choose the right Buff & Blend material for the specific project. Different Buff & Blend materials were created for different applications, and the materials help distinguish one roll from another.

Choosing the Right Buff & Blend Material

Each of the Standard Abrasives Buff & Blend materials offers unique benefits. The materials include:

  • GP: A general-purpose material that delivers a high cut rate and consistent finish. It's great for intermediate cleaning, blending, deburring, and finishing.
  • AP: A more aggressive material than GP that produces a coarser finish.
  • HS and HS-F: High-strength materials that are tear-resistant and ideal for final finishing on irregularly-shaped parts. HS-F is the best material for light deburring and finishing.

The Standard Abrasives™ Aluminum Oxide Buff and Blend Rolls come in varying widths, from 1 inch to 38 inches, to fit a range of sanding tools. These rolls can be used on orbital or straight-line sanders to produce matte and satin finishes or may be cut and shaped for hand-sanding applications.

The Many Benefits of Open Web Abrasives

Every Standard Abrasives™ Aluminum Oxide Buff and Blend Roll features nonwoven nylon strands and aluminum oxide mineral mixed with resin. Gaps between the nylon fibers allow unwanted swarf to escape, enhancing load resistance. As the abrasive is less likely to clog with debris, the mineral keeps cutting sharper, longer. Wear and tear from excess buildup is reduced. The open web material is also waterproof and may be used with lubricants, which help to keep the abrasive running cool and wash away swarf. The load-resistant properties of the web, combined with the swarf-cleaning action of the lubricant, help to prevent workpiece contamination. Rolls may be used on a variety of substrates: ferrous and non-ferrous metals, aluminum, high nickel/chrome alloys, and stainless steel. This abrasive is designed to help tackle industrial applications with efficiency and ease.

Brochures, Catalogs & Data Sheets
  Add to cart